Hoover H-PURIFIER Manuel D'utilisation page 7

PREPARING YOUR H-PURIFIER
1. Filter Assembly [Fig. 1]
Before using your H-Purifier product you will need to remove the filter from it's protective packaging:
• Remove the Air Inlet Cover from your product, grip the two Air inlet cover handles and pull from the product. [Fig. 1a]
• Remove the plug from the transport location. [Fig. 1b]
• Unlock the Filter release switch. [Fig. 1c]
• Remove the filter from your product and remove the outer packaging. [Fig. 1d,e]
• Refit the filter into your product. [Fig. 1f]
• Lock the filter release switch. [Fig. 1g]
• Refit the Air Inlet Cover to your product. [Fig. 1h]
Fig. 1
2. Install the Diffuser Bottle [Fig. 2]
To prepare your H-Purifier product for the Diffuser function:
• Remove the Diffuser Cover from the product. [Fig. 2a]
• Remove the Diffuser Unit from the Diffuser Cover. [Fig. 2b]
Remove the bottle of H-Essence or H-Biotics from the packaging and remove the cap. [Fig. 2c]
•
• Tightly screw the bottle on the Diffuser unit. [Fig. 2d]
Refit the Diffuser Unit into the Diffuser Cover. [Fig. 2e]
•
• Refit the Diffuser Cover into the product. [Fig. 2f]
Fig. 2
GB
7 7 7