Preparing Work On The Vehicle - CTR CLT 1 Manuel De Service

pag
54
The vehicle should be at operating temperature.
The operation of the air conditioning system is to set on maximum cold.
fan to set on maximum speed and the setting of the air flow have to be thru the air ducts at the
instrument panel. This is also the measuring point for the air outlet temperature
a measuring system (a/C service station is optimal) for the pressure has to be attached to the air
conditioning system.
To measure the out let temperature use a thermometer.
disconnect the plug direct on the compressor and connect the line from the CLT1.
should the plug not fit - use the appropriate adapter or the universal set of cables.
image: shows you the point of connection at a
denso Compressor
general reference:
The polarity when connecting the electromagnetic control valve does not have relevance. howe-
ver a clear polarity should be ascertainable should for the protection of the equipment and the
compressor these be kept.
USER MANUAL CLt1 REF 4018400

PRePARING wORk ON The vehICLe

image: shows you the point of connecting in
a vW Touran with a sanden compressor.