List Of Figures - Exhausto RPT-20T Instructions

LIST OF FIGURES

The following figures are located at the back of the instructions:
Fig. 1: Removing the front cover
Fig. 2: Terminal overview
Fig. 3: Connecting Modbus using RJ12 6P4C Connector
Fig. 4: Connecting Modbus using screw terminals
Fig. 5: Connecting Sensor to Channel 1
Fig. 6: Connecting Sensor to Channel 2
Fig. 7: Drill template
INTRODUCTION
RPT-20T is a touch room panel, with a user friendly graphical user
interface, specifically designed to control ventilation in a single
room. The room panel communicates with the OJ GreenZone™
module through Modbus interface, ensuring easy installation, high
comfort and low energy consumption.
The RPT-20T room panel has a built-in temperature sensor and
two channels for connecting sensors with 0-10 VDC output, also
ensuring easy installation of various room sensors.
PRODUCT PROGRAMME
Type
RPT-20T
FUNCTION
If screen saver is activated, press the screen once to enter the main
screen.
RPT-20T
Instruction
English
Product
2" Room panel with temperature sensor
© 2016 OJ Electronics A/S 3