Care And Maintenance; Changing The Filter; Cleaning The Rotary Brush - oneConcept XL-618 Clean Free Mode D'emploi

CARE AND MAINTENANCE

Changing the Filter

1 Turn off the cordless vacuum cleaner.
2 Open the release latch on the dust container and p
3 Pull out the dust filter.
4 Remove the dust from the dust filter and from the dust container as well.
5 Clean the dust filter under water. Let it dry completely.
6 Carefully replace the dust filter in the dust container.
7 Close the release latch of the dust container on the vacuum cleaner.

Cleaning the Rotary Brush

1 Turn the screw on the underside of the brush holder to the position
‚unlocked' .
2 Open the brush holder (1) and take out the rotary brush (2).
3 Clean the rotary brush, let it dry and replace it into the rush holder.
4 Turn the screw of the brush holder back into the locked position.
EN
23