Use; System Requirements; Connecting The Hard Drive; Removing The Hard Drive - Intenso 875417 Notice D'utilisation

USE

System requirements

This hard drive is compatible with the operating systems MS Windows 7 / 8 / 8.1 / 10 and
Mac OS 10.x*. A free USB interface is required to operate it.
*Trademarks: Windows 7 / 8 / 8.1 / 10 are registered trademarks of the Microsoft Corporation.
Macintosh and MAC are registered trademarks of Apple Computer. All brands and third party
names are the property of the respective user.
Notes:
A USB 3.0 interface card is necessary for the USB 3.0 operation The hard drive is downward
compatible to previous USB standards. The hardware configuration of your PC and the used
operating system can influence the compatibility of the hard drive.
Power supply under USB 2.0: In the case that your USB 3.0 hard drive is not recognised on a
computer with a USB 2.0 port, the power supply could be a possible cause. Please connect a USB
hub with external power supply in this case.

Connecting the hard drive

To connect the external hard drive to your computer, please use only the supplied USB cable.
Connect the USB 3.0 plug with the Intenso hard drive and the plug of the USB cable end with
your computer.
The computer recognizes the "new hardware" and installs the driver automatically. Wait until the
driver installation is completed. In the "workplace" there is now another drive with the
designation "Intenso" available.
As soon as the external drive is connected with the computer, the LED lights up The LED flashes
when a write or read operation is carried out.

Removing the hard drive

Depending on the used operating system, the hard drive must be logged off before the
connection to the computer is interrupted. For further details please refer to the Help Section of
your operating system provider. The device may not be removed when it is still being accessed
(flashing LED). This can lead to damages and/or data loss. Please close all the files located on the
hard drive (photos, documents, etc.) before removing the hard drive.
LED USB 3.0 Micro B
EN - Page 3 of 6