Publicité
Les langues disponibles
Les langues disponibles
4. Operations
Control once again that by the installation the device or the net management didn't
be damaged. Pay attention also to the fact that the feeler cable was snapped not
sharply, because thereby the function can be affected.
Display
Light level symbol
day/night difference symbol
alarm symbol
humidify symbol
relative humidity symbol
Operating instructions
Basic functions
-
Digital hygrostat for humidity measurement and control.
-
large display for clearer information indicates.
-
Day/night difference controlled by light sensor with adjustable light level.
-
Alarm function with both LED and LCD.
-
Humidifying working status will be indicated by both LED and display.
-
Memory function to avoid lost of former settings.
-
for safety reason, when you enter programming mode, slot will be discon
nected.
-
The Hygrostat is a device for in-door using only
Instraction
1.Put the humidity sensor to a suitable place(please be noticed that the humidity
sensor can not be immersed into water). Connect the device to mains supplier(plug
in), display shows all symbols around 2 seconds, then indicate measured current
humidity value.
2.Program the relative humidity
press
or
buttons to adjust the humidity value
you want.
Select range:
From 10%-95% each press is 1%.
(eg. 75%RH)
Publicité
