General Safety Information - Speedlink SL-4030 Mode D'emploi

No power
Check the unit is switched on.
Verify that there is power at the supply socket by plugging in
another device.
No sound or picture
Check that the device is correctly connected.
Make sure you switched on the TV.
Check the audio connections.
The MultiStation provides a means of connecting further devices
and selecting, by means of a switch on the front, which of two
devices you wish to use. If you have connected a device such
as a TV to „Input 1" on the back of the unit, move the switch on
the front to „No. 1" to transmit the video/audio signals from
„Input 1".
If you have connected a device such as a video recorder to
„Input 2" on the back of the unit, move the switch on the front to
„No. 2" to transmit the signals from that input.

General safety information

Under no circumstances take the Multistation 6in1 apart!
• Do not attempt to service or repair the device yourself.
• Refer all servicing to qualified service personnel.
15
D
GB
F
E
I