Installation Of The Oven Feet; Chain Lashing Illustration - Teka FS 901 5GE SS LPG Mode D'emploi

Installation Of The Oven Feet

In order to install the oven feet;
1. Foot attachment lath is installed on the oven from the bottom of the
oven as shown in (figure 10).Nuts are centered on these lathes in order
to screw feet. Complete the feet installation process by screwing the feet
to the nuts (figure 11).
2. You can balance your oven by turning the screwed feet according to
the surface type you are using.
3. If your oven has plastic food as in (figure 12) you can adjust your
ovens height from these feet as turned clockwise or anticlockwise.
Figure 10

Chain Lashing Illustration

Before using the appliance, in order
to ensure safe use, be sure to fix the
appliance to the wall using thechain and
hooked screw supplied. Ensure that the
hook is screwed into the wall securely.
Figure 11
31
Figure 12