pclocs Lockncharge iQ Travel Case 20 Instructions D'utilisation page 4

iQ Travel Case 20
STEP 1 - In the box.
Un-pack the iQ Travel Case 20 and accessories:
• iQ Travel Case 20 case
• iQ 16 Sync Charge Box
• IEC power cable
• USB host cable (USB A to USB B)
• iPad/ Tablet desktop stands
• User instructions for the iQ Travel Case 20
and iQ 16 Sync Charge Box
• Bonus 16x illuminating 30-pin High Speed USB cables
STEP 2 - Storing iPad devices in the
iQ Travel Case 20
• Firstly, Insert the devices into foam slots
• The iQ 16 Sync Charge Box and cables can be stored
in the largest slot
• The IEC power cable and USB host cable can be
placed on either sides of the iQ 16 Sync Charge Box
• The iPad stands are then palced over the top so
that they sit flat (illustrated in the image below)
STEP 3 - Charging and syncing.
• Carefully read the User Instructions for the iQ 16 SCB before attempting to charge or sync your iPad
devices.
• Remove the devices, iQ 16 SCB and cables and place on a stable surface. Attach the power cable, USB
host cable and the 30 Pin USB cables. Place the devices in the desktop stands provided.
• Connect a power cable to the power socket to charge. If syncing, also connect the host cable to the
Macbook. Follow the User Instructions for the iQ 16 SCB for syncing and charging.
Note: The devices and the iQ 16 SCB can get quite warm during charging and it is strongly recommended
these are not operated inside the foam.