Dmx Modes - Contest SFX scenografx Mode D'emploi

English
Menu
Fixture Test
Fixture
information
Factory Setting
4.2 - More about the 4 Lamp Setting modes
Lamps Setting modes allow you to define the dimmer behaviour.
Please find below the 4 modes and the brightness increase depending on the mode and DMX channel levels.
% DMX
Mode 1 : Linear

5 - DMX modes

The projector enters DMX mode as soon as an incoming DMX signal has been detected.
5.1 - 1-channel mode
Channel
1
5.2 - 2-channel mode
Channel
1
2
Page 6
Sous menu
Auto Test
Manual Test
Fixture Use time
Led Temp
Firmware Version
Resets your projector to factory settings
% DMX
Mode 2 : Exponential
Values
Dimmer
000 - 007
Values
Dimmer
000 - 255
Strobe
000 - 031
032 - 063
064 - 095
096 - 127
128 - 159
160 - 191
192 - 223
223 - 255
SFX-HO150W - 150W Horiziode projector with white LED
Automatically tests every function of the projector.
Allows to manually select and test any function
Displays time elapsed since the first time the projector was activated.
Displays the LED temperature
Displays the current software version.
% DMX
Mode 3 : Parabolic
Brightness from 0 - 100%
Brightness from 0 - 100%
LED off
LED on
Strobe effect at increasing speed
LED on
Pulse effects sequence
LED on
Random strobe effect at increasing speed
LED on
Action
% DMX
Mode 4 : S-shaped
Action
Action