Temperature Lock - Giacomini K492DY012 Mode D'emploi

K492DY012

6.9 - TEMPERATURE LOCK

It acts on the water supply temperature, depending on the limits set in Summer and
Winter.
If the supply temperature read by the floor probe K463PY001 reaches the limit value
(T T.L W in Winter or T T.L S in Summer) and this condition remains for a settable amount
of time (DLY T.L.), K492DY012 switches off the heating/air conditioning system (relay 1 =
OFF). The system will stay off for at least the settable amount of time (TMR T.L.).
12:01 01-01-18
1
23.0
1
off
ADV. PROG.
2
LIGHT ON 15S TMP LCK:ON
LIGHT INT S CORRECTION
DAY SAV YES DIFF: STD
TA = 5.0 CELSIUS
RH = 57% ITALIAN
ALR: OPEN RESET YES
CHG O: INP CH140 V1.0
DEW PNT: ON
■ --- = temperature lock disabled
■ ON = temperature lock can be set
T t.l. w = 55
3
T t.l.S= 14.0
4
WEEKLY PROGRAMMABLE THERMOSTAT
LIGHT ON 15S
2s
Note: the limit set point value for winter that can be set is
PRESS
between 30.0°C and 60.0°C.
Note: the limit set point value for summer that can be set is
PRESS
between 5.0°C and 20.0°C.
tmp lck: on
PRESS
-----
ON
x8
PRESS
29