11.2. Energy Eiciency
•
You should operate the dryer to full
capacity, but make sure that it is not
overloaded.
•
When the laundry is being washed,
the spin speed should be at the
highest level possible. This will shorten
the drying time and reduce energy
consumption.
•
Make sure that the same kinds of
laundry are dried together.
•
Please follow the recommendations
in the user manual for programme
selection.
•
For air circulation, leave an appropriate
clearance on the front and back sides
of the dryer. Do not cover the grills on
the front side of the machine.
•
Unless necessary, do not open the
door of the machine when drying. If you
have to open it, do not keep it open for
a long time.
•
Do not add new (wet) laundry during
the drying process.
•
Hairs and lint that detach from the
laundry and merge in the air are
collected by the "Lint Filters". Please
make sure that the ilters are cleaned
before and after each use.
•
For models with a heat pump, make
sure that the heat exchanger is cleaned
at least once a month or after each 30
uses.
•
During the drying process, the
environment where the dryer is installed
must be well ventilated.
EN - 29