Important; Installing On Top Of A Washing Machine - Sharp KD-GHB7S7PW2-DE Manuel D'utilisation

• To maintain a temperature that will not harm the
laundry (e.g. to prevent the laundry from catching
ire), a cooling process starts after the heating
process. After this, the programme ends. At the
end of the programme, always remove the laundry
promptly.
ATTENTION: Never use the dryer without a lint
ilter or with a damaged lint ilter.
• Lint ilters must be cleaned after each use as
indicated in 6.1. Cleaning the Lint Filter.
• Lint ilters must be dried after wet cleaning. Wet
ilters might cause malfunction during the drying
process.
• Lint accumulation must not to be allowed around
the tumble dryer (not applicable for appliances
intended to be vented to the exterior of the building)
IMPORTANT: The clearance between the dryer
and the loor should not be reduced with objects such
as carpets, wood or panel, otherwise, suicient air
intake cannot be ensured for the machine.
• Do not install the dryer in rooms where there is risk
of freezing. Freezing temperatures negatively afect
the dryers performance.Condensed water that
freezes in the pump and hose may cause damage.

1.5. Installing On Top Of a Washing Machine

ATTENTION: A washing machine cannot be placed
on the dryer. Pay attention to the warnings below
when installing the dryer on a washing machine.
ATTENTION: The dryer can only be placed on
washing machines that have a same capacity and
above.
EN - 9