Table des Matières
Publicité
EN
ORIGINAL INSTRUCTIONS' MANUAL
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric and
pneumatic tools - RAIDER. When properly installed and operating, RAIDER are safe and reliable
machines and work with them will deliver a real pleasure. For your convenience has been built and
excellent service network of 45 service station across the country.
Before using this machine, please carefully acquainted with these "instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully, including
the recommendations and warnings in them. To avoid unnecessary errors and accidents, it is impor-
tant that these instructions will remain available for future reference to all who will use the machine. If
you sell it to a new owner "Instructions for Use" must be submitted along with it to enable new users
to become familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of
the trademark RAIDER.
Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel 02 934 33 33, 934 10 10,
www.raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with
scope of certification: Trade, import, export and servicing of hobby and professional electrical, me-
chanical and pneumatic tools and general hardware. The certificate was issued by Moody Interna-
tional Certification Ltd, England.
TECHNICAL DATA
Parameter
Type of model
CHARGER
Input voltage
Frequency
Output voltage
Charging current
Battery charging time
Protection class
CORDLESS DRILL
Rated voltage
No-load speed
Chuck size
Torque control range
Мanual gearbox
Max. Toruqe force
Type of battery cells
Electric charge of the battery
Protection class
Units of
Value
measurement
-
RDP-CDL21
V AC
230
Hz
50
V DC
21.5
A
1.5
h
1.5
-
II
V DC
20 V
min
0-400/ 0-1500
-1
mm
13
-
15+1
-
2
Nm
58
-
Li-ion
Ah
2
-
III
Description of drawing on page:
1. On / Off switch
2. Rotational direction switch
3. Battery unlocking button
4. Battery capacity indicator
5. Hook for hanging a belt
6. Gear switch
7. Torque presetting ring
8. Led light
9.Asingle sleeve keyless chuck
10. Angle nozzle 90 ° for hard to reach places
11. Charger
12. Battery
11
Publicité
Table des Matières
