Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5-Altimeter/Altitude Change/Barometer
1- Altimeter: from the time mode,press
in altimeter mode ALTI .
2- If needed,press and hold
Increment on
settings)
Press and hold
3- Altitude change: from the ALTI mode, press
in altitude change mode AT↑↓ .
4- Press
to activate the altitude change mode. The icon
fis ON. Press
5- Press
recommended to pause the alti change mode in case of long
pause. Only the positive and the at altitude change will be
considered. All the negative altitude change are excluded
from the average.
6-Press
to display the positive altitude change SUM↑.
7-Press
to display the negative altitude change SUM↓.
to display the peak record MAX↑ .
8-Press
9-Press and hold
10- Barometer*: from the Alti mode, press
absloute pressure BARO .
* If you want to know the relative pressure, we recommand the following formula:
Relative pressure = Absolute pressure + Altitude / 8,3
Altitude range :-240 to 9200 Meter.
, decrement on
to validate.
to stop or pause the altitude change mode.
to get the climbing speed average SPD . It is
to reset the altitude change mode.
until you enter
to calibrate the altitude.
. (
+
= factory
to enter
to display the
11
Publicité
Table des Matières
