Menu Options; Starting Address - Chauvet DJ Gobo Zoom USB Manuel De Référence

Gobo Zoom USB QRG

Menu Options

Main Level
2-CH
Gobo
U--
SEr

Starting Address

Master/Slave
Connection
D-Fi USB
Connectivity
DMX Values
2-CH
Channel Function
Programming Levels
d--1–512
StOP
L-SP
r-SP
U 0–U255
On
OFF
To ensure full access to the two channels available in DMX mode, the
highest recommended DMX address is 511.
The Gobo Zoom USB uses the DMX data connection for its Master/Slave
mode. Instructions for connecting and configuring this product for
Master/Slave operation are in the User Manual.
The Gobo Zoom USB
receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ.
Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into
the USB port then set the product's DMX Personality and DMX Address.
Further instructions for connecting and configuring this product for D-Fi
USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the
USB port. Doing so may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired
DMX, manual display control/menu buttons and IRC-6 will be
unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display / Menu Buttons
1 Dimmer
2 Gobo Rotation
2-channel DMX mode
No rotation
L 0–L255 Left rotation speed
r 0–r255 Right rotation speed
Dimmer
Turns on IR control
Turns off IR control
is able to
Value Percent/Setting
000 ó 255 0–100%
000 ó 000 Stop
001 ó 122 Right rotation (fast to slow)
123 ó 133 Stop
134 ó 255 Left rotation (slow to fast)
5
Description
become a D-Fi
EN
wireless