After use
1. To switch off the hair straightening brush, press and hold the ON/OFF button
The operating display [2] turns off and OFF appears in the temperature display [3]. The hair straight-
ening brush is now switched off.
2. After each use, pull the mains plug out of the socket.
3. Place the hair straightening brush on a non-flammable surface. Allow the hair straightening brush
to cool down completely.
4. Remove any remaining hair from the bristles of the hair straightening brush
WARNING
Do not wind the mains cable [7] around the hair straightening brush. Risk of fire!
Store the hair straightening brush in a dry place out of the reach of children.
7. Cleaning
WARNING
• Always pull the mains plug out of the socket before cleaning the device. Risk of electric shock!
• Ensure that no water gets inside the device! Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
Note
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in the dishwasher.
• Do not use any aggressive, caustic, abrasive, or corrosive cleaning products or hard brushes.
• The casing of the hair straightening brush and the bristles may be cleaned with a soft cloth damp-
ened with warm water.
WARNING
• Allow the hair straightening brush to dry completely after cleaning before using it again.
8. Technical data
Weight
Voltage supply
Power consumption
Temperature range
Protection class
Ambient conditions
Permissible temperature
range
Subject to technical changes
approx. 424 g
AC 100-240 V, 50-60 Hz
45 W
120-180 °C
II
Only approved for indoors
-10 to +40 °C
21
[5] for 3 seconds.