Note
• Before using the device, remove all packaging material.
• Only connect the device to a socket that has the voltage shown on the type plate.
• Only pull the mains cable [7] from the socket by the mains plug.
• Under no circumstances should you open or repair the device yourself, as faultless functionali-
ty can no longer be guaranteed thereafter. Failure to comply will result in voiding of the warranty.
• In the event of a fault or damage, have the device repaired by a certifi ed specialist workshop.
• Never leave the device unattended during use.
• Do not use the device outside.
• If you pass on the device to someone else, make sure to also pass on these instructions for use.
5. Device description
1 Bristles
2 Operating display
3 Temperature display
4 +/- buttons (to adjust the temperature)
6. Operation
WARNING
• Position yourself on a dry, non-conductive surface. Risk of electric shock!
• Make sure that your hands are dry! Risk of electric shock!
• Your hair must be dry! Risk of electric shock!
• Do not cover the device. Place the hot/switched on device on a fi rm, level and heat-resistant sur-
face.
• The device can become very hot. When the device is hot, it must only be held using the handle –
risk of burns and fi re!
• Do not touch the bristles [1] with your hand. Risk of burns!
• Switch the device off immediately if it is faulty or not working properly.
2
3
1
5 ON/OFF button
6 Hanging loop
7 Mains cable
4
5
19
6
7