Operation Instructions; Filling The Fuel Tank - ENJOYABLE WARMTH SF Serie Manuel Du Propriétaire

Owner's manual

3. Operation instructions

3.1. Filling the fuel tank

WARNING! Make sure that the burner has cooled down before filling the
fuel tank – allow at least 30 minutes after operation before
filling the fuel tank!
WARNING! Always fill the fuel tank; never pour fuel directly into the
burner element.
Use the filling hose to fill the fuel tank. Put 1 side
into the jerry can with bio-ethanol, and the other
side onto the nozzle on the burner. Then, press the
fill button.
Manual fuel inlet
The fill button will pump the fuel from the jerry can into the fuel chamber.
It will automatically stop when the fuel chamber is full. Then, disconnect
the filling hose.
If you fill using the manual fuel inlet, ensure you do not spill any fuel. In
case fuel is spilled, clean it according to the instructions in § 2.2 (Safety
precautions). When the alarm buzzer sounds, stop fueling immediately.
SF-xxx-x series bio-ethanol burner
Page 16 / 181
Fill button
Nozzle
Version 1.3