Snow Plow; Vehicle - WARRIOR Rampage Manuel De L'utilisateur

iMportant safe operating practices
warning! When mounting or removing the snowplow, keep hands and feet
clear of the blade, mounting assembly and winch. Moving or falling assemblies
have a potential to cause personal injury. Never use your finger to check
alignment. Moving or falling assemblies could crush your finger.
caution: Transport speed should never exceed 70 km/h (45 mph). Adverse
travel conditions may dictate a further speed reduction.
3. wEAR A SEAT bELT wHEN PLOwINg SNOw. Hidden obstacles could make
the vehicle stop suddenly, resulting in personal injury.
4. PUT THE VEHIcLE IN PARK OR INTO gEAR ANd REMOVE THE IgNITION
KEY to prevent others from starting the vehicle when installing or servicing the
plow.
5. dRESS PROPERLY. Do not wear loose clothing or jewellery. Keep your hair,
clothing, and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts. For warmth, wear layers of clothing, taking
off layers as you get warmer.
6. wEAR SAFETY gOggLES wHEN wORKINg UNdER THE HOOd OF THE
VEHIcLE. for eye protection from battery acid, gasoline, dirt and dust. Everyday
eyeglasses have only impact resistance lenses. They are not safety glasses.
7. FOR wORK cONNEcTEd wITH THE VEHIcLE, avoid touching any hot
surfaces such as the engine, radiator, hoses and exhaust pipes.
8. ALwAYS HAVE A FIRE ExTINgUISHER, rated BC, handy for flammable liquid
and electrical fires.
9. dO NOT PLOw SNOw wITH YOUR HEAd OUT THE wINdOw. Sudden
stops or protruding obstacles could result in personal injury.
10. THE dRIVER ONLY SHOULd bE IN THE VEHIcLE when plowing snow.

snow plow

1. MAINTAIN THE SNOwPLOw ANd KEEP IT cLEAN ANd LUbRIcATEd.
This applies even when the unit is not in use so as to avoid corrosion. In the off
season, inspect the unit and apply corrosion-resistant paint to any areas that
show corrosion to prevent further damage. If stored outside, cover the winch
assembly.
2. cAREFULLY INSPEcT YOUR SNOwPLOw bEFORE EVERY USE.
Particularly check the alignment of moving parts and tighten any loose screws
and bolts.
3. THIS UNIT IS NOT INTENdEd FOR cOMMERcIAL USE.
warning! Carefully inspect all snowplow components and bolts for
looseness, wear and damage when mounting or removing the unit and before
transporting it.
4. wITH HEAVIER FULL-SIzEd VEHIcLES, MAINLY THROUgH MOMENTUM,
IT MAY bE EASIER TO dAMAgE THE PLOw ASSEMbLY. Cautious use will
help extend your years of trouble-free service.

Vehicle

5. dO NOT ATTEMPT PLOwINg SNOw AT SPEEdS AbOVE 15 KM/H
(10 MPH). Driving at speeds above 15 km/h (10 mph) with the plow attached
reduces the cool air intake and may cause your vehicle engine to overheat.
Perhaps a better alternative for transporting the plow while reducing the
likelihood of vehicle overheating would be to mount the plow to a rear-mounted
Class 3, 2 inch hitch receiver.
6. dO NOT OVERLOAd THE VEHIcLE. Take into account the loaded vehicle
weight, including the entire snowplow assembly, all accessories, driver and
passenger, fluids, and cargo. This weight is not to exceed the front/rear Gross
En.4
K2SP man