Raider RD-SA26 Mode D'emploi Original page 8

8 www.raider.bg
4. Plot of sander.
5. Open for removal of dust.
Should not be used for sanding machines
sanding materials
asbestos or covered with plaster surfaces!FOR
Your own Safety READ BEFORE use
WARNING, DANGER!
Unprotected work with the workpiece or
to touch the moving parts of power can lead
to severe physical injuries and noise impact
to hearing damage if not complied with the
rules listed below and those in the "Safety
Instructions."
Safety requirements
Before attempting to work with power tools is
necessary to illustrate the following:
- Is the voltage of the grid corresponds to
that marked on the plate with technical details
of power;
- Check to see how is the breaker. Sander
must be joined and separated from the supply
network only when off switch.
- The reliability of the power cord and plug.
Follow AT WORK REQUIREMENTS FOR
SAFETY
Always use safety glasses.
Use tools for sound protection.
Use prahozashtitna mask.
- It is recommended to use protective gloves.
- Include sandert under load.
- Keep the power cord outside the scope of
sander.
- Look for a permanent safe and sustainable
state of his body.
- Secure the workpiece in the vise or other
suitable method.
- Disconnect the plug from the outlet before
making any adjustments, repair or maintenance.
- Power should not be used outdoors in rainy
weather, in damp environments (after rain) or
near flammable liquids and gases. Workplace
should be well lit.
- Power is designed to work in areas and areas
under normal fire danger "Regulation 2" Fire-
building and technical standards. Izpolzvaneto
not allowed him
environments where the ambient air temperature
above 40C, particularly in moist environments
where there is rainfall and chemical active
containing magnesium,
to fire and explosive
environment. Workplace should be well lit.
- Information on noise and vibration:
- Sound pressure level LpA = 79.1 dB(А)
- Level of sound power LwA = 90.1 dB(A)
K : 3dB(A) K : 3dB(A)
PA WA
- Level of vibration ah = 9.108 m/s
K: 1.5 m/s
2
Information for safe handling of sander
During operation sander must be held firmly
with both hands.
During the sanding of wood and metal
surfaces painted with paints with the addition
of lead, may appear harmful or toxic dust.
Contact or inhalation of such dust may endanger
the health of workers or bystanders. Must use
appropriate personal
such as: filter semi-mask and goggles. Should
include installation and removal of dust.
• Pregnant women and children not to enter
any premises in which using a sander to remove
paint containing lead compounds.
In the room in which using a sander to remove
paint containing lead compounds should not
eat, drink or smoke.
Avoid the use of long extension.
• Keep electric power cable outside the scope
of the moving parts of machinery. Make sure he
always passes behind
• Before storing the machine, turn off the
engine and make sure that all moving parts have
stopped their movement.
• Work with fully developed power cord, safely
extended, with capacity of 16 A.
• If the cable is damaged or cut during the
operation, do not touch. Immediately disconnect
the plug, never use a machine with a damaged
cable. It must be replaced by a new one from a
qualified person.
• During a contact, make sure the machine is
turned off
• "Rider" can not guarantee flawless operation
of the power only if they are running genuine
accessory device.
• The camera is not suitable for wet sanding
• Do not grind materials containing asbestos
• The camera is not suitable for use by
persons under 16 years of age.
• In case of
malfunction, disconnect the device immediately
and disconnect the electrical contact network
• When sanding metal sparks are formed. Do
not use a vacuum cleaner and keep others and
igniting material outside the scope of action
• Do not touch the sanding sheet.
2
protective equipment,
electrical or mechanical