Cleaning The Nozzles - Samsung DW80K7050 Serie Mode D'emploi

4. Remove any dirt or other remains from the fi lters, and then rinse them
under running water.
5. Reassemble the fi lters in the reverse order of the dissasembly, replace
the fi lter insert, and rotate clockwise to the close arrow.
If the fi lter insert is not closed properly, its performance will
CAUTION
be decreased.

CLEANING THE NOZZLES

If your dishwasher does not seem to be cleaning adequately or the nozzles seem clogged, you can clean
each of the nozzles. When removing the nozzles, take care as they may break.
Lower nozzle
1. Check whether the nozzle holes are
clogged by food particles.
2. If cleaning is needed, remove the nozzle by
pulling it upwards.
3. Clean the nozzle, and then push it back
into place.
4. Check whether the nozzle is engaged
correctly by rotating it by hand.
DW7000KM-02025B-01_EN.indd Sec5:23 DW7000KM-02025B-02_EN.indd Sec5:23
English - 23
DW80K5050, DW80R5060
DW80R 0 1 Series 5 6
DW80K7050 Series
201 -0 - 2016-05-18 7 1 03 10:47:39 10:47:39