Technical Information - Solar-Log Sensor Box Professional Manuel D'installation

2. Installation Manual
2.1

Technical Information

The Sensor Box Professional is equipped with a high-quality monocrystalline solarcell. This very reliable and
rugged sensor are designed for longlasting outdoor use (IP65).
The Solar-Log™ continuously compares the production of the PV-Plant with the measurements of the sen-
sor. If the Solar-Log™ detects a definable difference an error message will be generated.
Opening the sensor is not necessary and would lead to a loss of guarantee.
2.2 Mechanical Installation Sensor Box Professional
The Sensor Box Professional must be mounted parallel; this means the same adjustment and pitch as the
solar-modules, fastened with screws on the substructure. The sensor should be mounted at a place where
there are no shadows. A complex mounting of a cell-temperature-sensor is not necessary, it is included
within the irradiance sensor.
Recommended Mounting
When mounting the sensor, please take care that the cable is mounted as seen in this figure.
Not allowed
5