Salamander Designs FPS Serie Mode D'emploi page 10

INSTALL LEGS
Install legs by having one person hold leg and other person fasten with "D"
screws.
Please note that the leg has a long side and short side - the long side with
caster brake faces the front of the unit.
G
D x 10
After legs have been securely fastened to stand, use two-people lift stand
to upright position.
There are 5 "D" screws per leg. The fifth screw is installed on the top
of the leg as shown above.
Salamander Mobile Interactive Display Stands 500-680 [01.16] page 10 of 14