Check Installation; Management Of Wireless Accessories (Elios4You Smart Only); Response Of Leds (Table 1); Operation Of Button (Table 2) - Astrel Group Elios4you Manuel D'installation Et D'instructions

CAUTION: ensure that there are no other consumers connected between the two CTs and the relative meters, otherwise
the measurements will not be correct
2) Having installed and powered up the device, download the free "Elios4you" App for tablet or smartphone from App Store or
Google Play Store, and proceed to install it
3) Launch the "Elios4you" App and follow the guided configuration procedure as illustrated on www.4-noks.com/tutorial
4) Elios4you Smart device only: access the
RC (Radio Control) function.
5) Set the correct parameters of the photovoltaic system and the household electrical consumer by way of the App: Menu
 "System Parameters"
operation, tap OK.
6) For more information, go to www.4-noks.com/tutorial

Check installation

7) Check on this page that all items of data are correct:
− Tap the "Home" icon
− Make certain that the value of the power output — "Production"
− Check whether or not the "Consumption" value corresponds to the instantaneous usage of the monitored consumer
CAUTION: when Elios4you is configured for access to the internet (via Router/AP), the data log will also be sent to the 4-cloud portal.
Connect to the cloud site www.4-cloud.org and follow the instructions for registration. Adopt the USER code indicated on the label
for pairing the device.
4. Management of wireless accessories
(Elios4you Smart only)
With the "Elios4you" App, the user can program the activation of electrical consumers according to the surplus energy produced,
using radio accessories for self-consumption. For Smart RC accessories compatible with the Elios4you Smart device, refer to the
relative installation and operating manuals.
5.

Response of Leds (table 1)

Led Colour
Red
Red
Red
Green
Green
Green
Red
Green
6.

Operation of button (table 2)

Function Command
First Press briefly
configuration (6 s approx)
Press and hold
Reset
(30 s approx)
 Smart RC  menu and tap the "Enable" button to activate the Smart
 select "Energy Management" and enter the preferred values  on completing the
to go back to the "System activity" page
Meaning
Blink frequency proportional to the amount of energy generated by the photovoltaic system
Blink frequency proportional to the amount of energy exchanged with the grid
If alight: the system is drawing electrical energy from the grid
If alight: the system is supplying electrical energy to the grid
Power supply
Wi-Fi active
No connection between Elios4you and tablet or smartphone
Not used
Meaning
Procedure required by the "Elios4you" App when the device is first configured. For more
information: www.4-noks.com/tutorial
The Reset function restores the parameters of the device to the factory settings
13
— corresponds to the reading of the inverter
EN