FS AP-N505 Guide De Démarrage Rapide page 4

Rate
(SFP port)
1G
1G
Electrical
Port
2.5G
2.5G
NOTE: 1. The SFP port of AP does not support negotiated rate. When using the optical
module, the rates of the AP, the optical module and the device at the other end must be
the same.
2. The AP supports optical&electrical uplink port multiplexing. If optical and electrical
uplink ports connect to cables at the same time, the AP will preferentially select the optical
uplink port as the data transmission port (automatically disables the electrical uplink port).
When the optical uplink port cable is removed, the electrical uplink port automatically starts.
Button
Button
Reset
LED
FIT AP
State
Off
Blinking Green
Solid Green
Blinking Red
Rate
(optical module)
2.5G
1G
2.5G
1G
Description
Restart: Press the "Reset" button for less than 2 seconds.
Restore to Factory Default Settings: Press and hold the "Reset" button
for more than 3 seconds.
Frequency Description
AP is not connected to the power supply, or AP is in
N/A
DND state, which can be closed by software.
Uboot program initialization in progress.
3Hz
Main program initialization in progress.
N/A
Initialization is complete, but both Ethernet links
3Hz
are down.
Negotiated Rate of the Device
1G 1G/10G/auto 1G/2.5G/10G/auto
/ /
1G 1G
/ /
/ /
/
1G
2.5G
/
3