Holtex+ TysonBio TB100 Manuel D'utilisation page 17

DISPLAY WHAT IT MEANS
Temperature is low
during the test
procedure.
Temperature is too high
to perform the test.
Temperature is too low
to perform the test.
An error message
indicating a problem
with the test strip.
An error message
indicating a problem
with the meter.
Battery power is low.
Meter will provide
approximately 50
more measurements.
Battery power is too low
for further usage.
All testing values recorded in
the memory have been
shown.
ACTION
Result may be larger variation.
Move to a warmer environment
(10 - 40˚C or 50 - 104˚F) and wait
15 minutes before re-testing.
Repeat the test in a
cooler setting (10 - 40°C
or 50 - 104°F). Wait 15
minutes before re-
testing.
Repeat the test in a
warmer setting (10 - 40°C
or 50 - 104°F). Wait 15
minutes before re-testing.
Review the instructions
and try again with a
new test strip.
Press "reset" button and
check the meter again with
the test strip. If the
problem persists, contact
Customer Service for help.
Replace with a new 3-
Volt lithium battery (CR-
2032).
Replace with a new 3-
Volt lithium battery (CR-
2032) immediately.
Press M or S button or
wait for 3 minutes to
turn off the meter.
17