Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
The following are some helpful tips to help you diagnose and rectify some common problems.
Problems
The bubble system is not
operating.
The heating system is not
operating.
The filtering system is not
operating.
The spa tub is leaking water.
The water is dirty.
2021-10-12 OCG BluMill Spa Pool Ibiza Manual V01.indd 17
2021-10-12 OCG BluMill Spa Pool Ibiza Manual V01.indd 17
Probable causes
Air pump too hot.
Problem with the power
supply.
Temperature set too low.
Filter cartridge dirty.
Water level too low.
Ambient temperature too
high.
Problem with the heating
element.
Filter cartridge dirty.
Debris or dirt in the inlet and
outlet.
Problem with the power
supply.
Incorrect voltage.
Spa tub is torn or punctured.
Insufficient filtering time.
Filter cartridge dirty.
Improper water maintenance.
Solutions
Unplug the air pump. After
the air pump has cooled, insert
the plug and press the Bubble
button to activate.
Contact the service depart-
ment if the system does not
reset.
Set to a higher temperature
(between 20 °C and 40 °C).
Clean/replace the filter
cartridge.
Add water to the indicated
level.
Allow the spa tub to acclimati-
se to its surroundings.
Contact the service depart-
ment.
Clean/replace the filter
cartridge.
Remove debris or dirt from the
inlet and outlet.
Contact the service depart-
ment if the system does not
reset.
Ask a professional electrician
to check the household input
voltage or frequency.
Use the repair patch provided.
Increase the filtration time.
Clean/replace the filter
cartridge.
Refer to the chemical manu-
facturer's instructions.
17
EN
16-12-2021 10:06
16-12-2021 10:06
Publicité
Table des Matières
