Safety Information - USAG 076 PD Manuel D'utilisation

EN

SAFETY INFORMATION

instruments with a measurement category (CAT III 600V) and Pollution degree 2.
Warning
To avoid possible electric shock or personal injury, follow these guidelines:
Pay particular attention to the insulation surrounding the connectors.
Inspect the test leads for damaged insulation or exposed metal. Check the test leads
for continuity. Replace damaged test leads before you use the meter.
in doubt, have the meter serviced.
it under wet condition
terminals or between any terminal and earth ground.
voltages pose a shock hazard.
disconnect test leads, disconnect the live test lead first.
conductor under test before opening the case or the battery cover.
loosened.
injury, replace the batteries as soon as the low battery indicator ( ) appears.
be used to prevent shock and arc blast injury where hazardous live conductors are
exposed.
11