Trotec BX11 Manuel D'utilisation page 12

D. The device will return to its original setting if you fail to press a key
within 5 seconds or press the "t"-key.
E. Press the "t"-key and hold for longer than 3 seconds to delete all
data (the time and day are not deleted). The display blinks three
times in succession to remind you of this procedure.
DISPLAY
There are three different display modes to show the individual val-
ues on the display. Press the "s" key to get from one display mode
to another.
1. Display mode for the time of day (24 hours), weekday, power
load and frequency.
B - 5
Time
Current power consumption
Frequency
Day
Operating manual – Energy cost measuring instrument
2. Display mode for the current voltage, amperage and the total
recording time.
3. Display mode for the total energy consumption and the energy
costs resulting therefrom.
MAINTENANCE
• Check your energy meter regularly for any signs of damage.
• The device is maintenance-free. Wipe the display with a soft, dry,
lint-free cloth if necessary. Do not use any cleaning agents.
Voltage
Amperage
Total recording time
Day
Total energy consumption
Total energy costs
Day
EN