ETNA A2915RVS Mode D'emploi page 4

GB
Installation
4
To build-in the drawer in combination with another appliance there
must be a fixed, interim shelf in the housing unit to support the weight
of both appliances.
The appliance to be combined with the drawer will be placed directly
on the latter without any need to have a separating shelf.
To build-in the appliance which is combined with the drawer, follow the
instructions set out in the respective instructions and fitting booklet.
Proceed as follows:
1. Place the drawer on the shelf and slide it towards the interior of the
niche in such a way that it is centred and completely lined up with
the front of the unit.
2. Check that the drawer's frame is properly levelled and is sitting
evenly on the shelf.
3. Open the drawer and fix the drawer to the sides of the unit using
the provided screws.