Technical Specifications - GoECOlife nanocut OPTIMUS GHC85P-BLK Instructions D'installation

8-sheet nanocut
OPTIMUS SERIES™

technical specifications

model GHC85P-BLK
cutting style nanocut
shred size 0.04" x 0.20" (1 x 5mm)
sheet capacity 8 sheets
shred speed max sheet capacity 9.19 ft/min (2.8 m/min)
intake throat width 8.66" (220mm)
dimensions (l x w x h) 15.35" x 11.42" x 23.82" (390 x 290 x 605mm)
weight 47 lbs (21.32 kg)
basket capacity 6.79 gallons (25.7 liters)
run time (min) 20 ON / 50 OFF
noise level (motor) 65 dB
how to use your shredder
Setup Instructions:
1. Connect the power cord to any standard 120 volt AC outlet. For pluggable equipment,
the socket-outlet shall be installed near the equipment and shall be easily accessible.
2. Toggle the main power switch on the top panel to the ON position.
3. Press the green GoECO
4. Insert paper to activate.
Setup Cautions:
1. All shredders have very sharp, exposed blades on the underside. Please use care when
mounting the shredder on to the wastebasket.
2. Make sure power cord is not damaged in any way and that the outlet is properly functioning.
3. Never attempt to shred sealed envelopes. Doing so may damage the shredder. Always
remove and unfold envelope contents completely before attempting to shred. NEVER
shred envelopes, labels or anything with glue or any sticky substance as this will lead to
paper jams.
4. It is normal for residual lubricant in the motor to burn off during the first several
extended uses of your shredder. Should you notice a slight burning odor or the presence
of small wisps of smoke during the first several extended uses, you may continue using
the shredder. If either symptom continues to occur after repeated use, please
contact technical support for assistance.
shredder
™
™
power saving button to turn ON the shredder.
®
1
limited
product warranty
(see warranty page
for details)