Selecting A Signal Source (Air Or Cable) For Pip; Changing The Channel Of The Sub (Pip) Picture - Samsung LN-S4096D Instructions Du Propriétaire

Selecting a Signal Source (Air or Cable) for PIP

If the PIP source is TV while PIP is On, you can select a different broadcasting source for the PIP picture from the main picture.

Changing the Channel of the Sub (PIP) Picture

After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels.
Alternate method
Press the CH or CH
the sub picture channels while PIP is on.
1
Press the
then press the ENTER
2
Press the
ENTER
• Air : "Air" antenna signal
Cable : "Cable" antenna signal
3
Press the
ENTER
Select "Return" by pressing the
ENTER
Press the EXIT button to exit.
1
Press the
then press the ENTER
2
Press the
ENTER
3
Press the
ENTER
• Air : "Air" antenna signal
Cable : "Cable" antenna signal
Select "Return" by pressing the
ENTER
Press the EXIT button to exit.
button under the cover of the remote control to change
MENU button. Press the
button.
or button to select "Air/CATV", then press the
button.
or button to select "Air" or "Cable", then press the
button.
or
button to return to the previous menu.
MENU button. Press the
button.
or button to select "Channel", then press the
button.
or button to select a channel you want, then press the
button.
or
button to return to the previous menu.
English-50
or button to select "PIP",
button, then press the
or button to select "PIP",
button, then press the