Top Panel - Montarbo TP-11 Notice D'emploi

TP-11
CONTROL PANEL
FRONT PANEL
1
2
1 INPUT SOCKET
Combo input socket for connection of audio sources (microphones or line level
instruments) via 6.35 mm jack or XLR.
2 SENS
Press this switch to select the sensitivity of the input:
- LINE: line level signal, for most common situations of use.
- MIC: microphone signal, dynamic or condenser microphone.
3 +48V
Phantom power switch; connect the microphone cable before activating and disconnect
the cable before deactivating. Check if your microphone requires a +48V power supply.
14
3

TOP PANEL

9
10
5
4
4 INPUT
Use this knob to control the level of the input signal to the preamp.
5 PRESET SELECTOR
This 16 position encoder enables you to choose the tonal characteristics applied to your
sound by the tube.
6 OUT
Use this knob to control the level of the output signal from the preamp.
User manual
8
7
6
15