Removing/Reinstalling The Bottom Plate - Maytag M500 Manuel D'utilisation

Removing and Reinstalling the
Bottom Plate
WARNING! To Reduce the Risk of Electrical
Shock or Injury From Moving Parts, Unplug
Before Servicing or Cleaning.
To Remove the Bottom Plate:
• Press the handle release pedal to place the
vacuum cleaner in the flat position.
• Turn the vacuum cleaner over exposing the
bottom plate.
• Turn the two screws a quarter turn to release the
bottom plate (Fig. 1). Remove the bottom plate.
• Reinstall the bottom plate by aligning the front
edge of the bottom plate into the notches inside
the nozzle housing (Fig. 2).
• Press the bottom plate into position until the
plate "clicks" on both sides. Tighten the two
screws a quarter turn to secure the bottom plate.
MAIntenAnCe AnD CARe
1
2
D
C
B
A
1 2
9
Fig. 1 5
3 4
Fig. 2
3 4 5
6
MATERIAL
DRAWN
ISSUED
SCALE
1.000 DO
6