Setting Up Or Hanging - Grundig 40 GUB 8688 A Mode D'emploi

Setting up or hanging

Select a location so that no direct sunlight
7
falls on the screen.
Setting up with stand
To mount the stand, refer to the
7
installation instructions included.
Place the TV set on a hard, level surface.
7
Preparing for mounting on the
VESA bracket
Contact authorised dealer to purchase the
bracket.
You will need:
A pair of scissors,
7
A crosstip screwdriver.
7
Follow the installation instructions for the
VESA bracket.
1. Place the TV set in the film on a smooth
surface with the screen facing down.
2. Cut open the film on the back side
using the scissors.
3. Connect the required cables to the
connectors on the TV set. See the
"Connections" section in this manual.
4. Tie the cables so they do not hang
down onto the floor.
5. Screw the VESA bracket onto the TV set
and mount it according to its installation
instructions.
SERVICE
VESA
HDMI4
Optic Out LAN USB3 HDMI3 SATELLITE ANT-IN
(ARC) 13/18V max.500mA 5 V max.50mA
ENGLISH 7