FS NMC-SNMP Guide De Démarrage Rapide page 4

Step 4: Connect one end of the Ethernet cable to the network
interface of the SNMP card.
Step 5: Connect the other end of the Ethernet cable to a computer
host or a switch.
NOTE:
1. The ID of the shown UPS is #96676.
2. This NMC-SNMP card is compitable with any UPS on fs.com platform.
Configuring the NMC-SNMP Card
Configuring the NMC-SNMP Card via Web User
Interface
Web Login
Step 1: Connect a computer to the NMC-SNMP card with an Ethernet
cable.
Step 2: Set the computer IP address to the same network segment as
the default IP address of NMC-SNMP(For example, set the PC
IP address to "192.168.137.101").
Step 3: Confirm the normal network communication between
computer and the NMC-SNMP card (verify by means of ping
packets).
SNMP Monitor System
admin
Login
EN 3