FS NMC-SNMP Guide De Démarrage Rapide page 3

LEDs
Power
Status
Run
Installing
Step 1: Remove the cover of the intelligent card slot from the UPS
back panel by using a screwdriver, and save the screws.
Step 2: Insert the NMC-SNMP card into the intelligent card slot of
the UPS.
Step 3: Secure the NMC-SNMP card with the removed screws.
State
Solid Yellow
Off
Solid Red
Off
Flash Green
Off
HIGH CURRENT OUTPUT
INPUT
Description
The device is powered on
The device is not powered on
The device is fail
The device is normal
The device is running properly
The device is not running
BREAKER
Intelligent Card Slot
RJ45 NET SURGE PROTECTION
EN 2