Technical Specifications; Operation - Omcan FP-CN-0185 Instructions

Safety and Warranty
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste)according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

Model
Horse Power
Disc Speed
Mouth Opening
Electrical
Weight
Dimensions (DWH)
Item Number

Operation

CONTROLS
The controls and pilot light are on the right side of the base when the machine is located in front of the
operator.
1. Green button for starting the machine.
2. Red button for stopping the machine.
SETTING THE DISCS ON THE MACHINE
Rotate the knob as shown (Pic. 4) and open the cover. First set the plastic ejecting disc (Pic. 5), then the
disc selected for the cutting. Close the cover and reverse the rotation of the handle. Use the start button to
automatically hook the discs in the correct position.
SETTING AND CUTTING THE FOOD
Lift the handle and set the food inside the product opening, then close the handle. Press the green start button
with your right hand and with your left hand, lightly push the handle downwards until food is fully used. Lift
the handle to put in more food. The machine starts automatically when the handle is closed. Repeat these
operations until all food is used. It is possible to use the two openings with a single disc. When two discs are
FP-CN-0185
0.75
270 RPM
5.1" x 2.2" / 130 x 55mm
110V / 60Hz / 1 PH
50.6 lbs. / 23 kgs.
19" x 9" x 19.7" / 483 x 229 x 500mm
19476
6