DAISHIN SRM180K Manuel D'utilisation page 13

Belt maintenance :
A loose belt slips and involve loss of power. An overtighten belt involve a fast wear of
bearings.
Check belt tension and condition after the first 3 hours of use and every week. Check if the belets are not loose,
overtighten or cracked. Replace the belts as necessary
Oil level:
Check by the gauge (1 figure 16). Unscrew the cap, the level should be at the opening. Check only
engine stopped since ten minutes on a flat level surface.
 Use only good quality gear oil SAE 80W90 API GL4.
 Ask to your dealer to change oil once a year.
1
Figure 16
DAISHIN SRM180K Page 15