Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
M
ONTHLY MAINTENANCE
Transmission wire adjustment:
If the machine does not move or if the transmission belt slips when transmission lever is pressed,
adjust the tension wire as follow : unscrew the locking screw (1 figure 14) and increase the wire
tension. Try to move the machine again. Perform the adjustment again if needed.
If the machine move when transmission lever is released, adjust the tension wire as follow : unscrew
the locking screw and decrease the wire tension. Try to stop the machine again. Perform the
adjustment again if needed.
Blade wire:
If the blade does not stop when the blade lever is released, adjust the tension wire as follow :
unscrew the locking screw (2 figure 14) and and decrease the wire tension. Try the machine again.
Perform the adjustment again if needed.
If the blade does not move when transmission lever is pressed, adjust the tension wire as follow :
unscrew the locking screw increase the wire tension. Try the machine again. Perform the adjustment
again if needed.
Differential locking wire :
If the locking does not engage when the lever is pressed, adjust the tension wire as follow :
To increase the tension wire : unscrew the locking screw (1 figure 15) and increase the wire tension.
Try the machine again. Perform the adjustment again if needed.
To loosen the tension wire : unscrew the locking screw and decrease the wire tension. Try the
machine again. Perform the adjustment again if needed.
DAISHIN SRM180K
Figure 14
Figure 15
Page 14
Publicité
Table des Matières
