Gima 27288 Mode D'emploi page 9

9
OPERATION
The scale is fitted with an ON/OFF switch. Verify that the switch is set to "1" before any operation. Before
the person steps onto the scale it is necessary to lift the cursor of the altimeter beyond the apparent
height of the person.
After the person has stepped onto the scale, slowly lower the cursor until it touches the head.
Caution: Do not maintain the cursor in horizontal position because it may generate dangerous
situations.
INDICATOR Sign
[ 1 ] [ZERO] : Light when scale is at weight is "0"point.
[ 2 ] [STA] : Light when the weight is in the stable condition.
[ 3 ] [NET] : When scale display net weight, then the indicator is light.
[ 4 ] [SET/HOLD] : When the system CALIBRATION and data set , It's light.
[ 5 ] [ Lb] : When the system mode is "Lb" ,the indicator is light.
[ 6 ] [ BT ] : Battery lower indicator .
[ 7 ] [ AC ] : When the battery by the charging ,the indicator is light
Function of buttons
[ 1 ] ON/OFF: ON/STAND_BY display and scale operate.
[ 2 ] REZERO: At weighting mode Reset the Weight To "0", At other mode operation entered and data
save function.
[ 3 ] TARE : At weighting mode tare operation , At other mode the key can return weighting mode.
[ 4 ] ←(SET): At weighting mode can enter function selector mode, at function selector mode the key can.
Select set digital.
[ 5 ] ↑(N/G): At weighting mode the key can weight hold, at function selector mode the key can modification
value by select digital.
ENGLISH