tomado TRW2401B Mode D'emploi page 16

The control unit of the appliance is located on the outside. Check that the voltage corresponds with the voltage stated on the
information plate and insert the plug in the socket. The control panel lights up and you will hear a starting tone.
Control panel
The control panel is provided with touch control. This means that you do not have to press the buttons with force.
When the key control is locked and there has been no further key operation for 30 seconds, the control panel will switch off
automatically. Press a random key to activate the control panel.
Lock
The control panel locks automatically once the temperature no longer flashes on the display.
• Unlock the control panel by pressing the key lock
• Lock the control panel by pressing the key lock
locked and no keys can be operated, with the exception of the light key.
Adjusting the temperature
The required temperature can be set with the following keys:
• Press the temperature up key
cools at the set temperature.
• Press the temperature down key
cools at the set temperature.
• The temperature can be set from 5°C - 18°C / 41°F - 65°F. The recommended temperature is 12°C / 54°F.
To switch off the appliance, remove the plug from the socket.
Lighting
Press the light key to switch the lighting of the appliance on or off.
Memory function
The appliance has a memory function, in case of a power interruption. When the power supply has been restored,
the appliance will cool at the previously set temperature.
Switching between temperature units [°C / °F ]
Press temperature keys and
versa. The set temperature is shown on the display.
Attention:
The ambient temperature, the frequency of opening the door and the position of the appliance have an effect on
the temperature in the appliance. Take this into account when adjusting the temperature.
• You should never place hazardous, highly flammable or explosive substances such as alcohol, acetone or petrol in the
appliance, because there will be a hazard of explosion.
• Do not place food in the appliance.
• Leave sufficient space between the bottles, to allow the air to circulate properly.
• Do not leave the door open for longer than necessary.
USE
lock display
light
for 3 seconds. The temperature flashes and all keys can be operated.
for 3 seconds. The temperature no longer flashes, the control panel is
to increase the temperature by 1°C. Once the temperature stops flashing, the appliance
to decrease the temperature by 1°C. Once the temperature stops flashing, the appliance
at the same time to switch the temperature display from Celsius to Fahrenheit and vice
EN - 16
temperature up temperature down