Purpose Of Use; Work Area Safety; Safety Instructions - Beta 1837PLUS Mode D'emploi

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
LED SPOTLIGHT, 26W, ALUMINIUM BASE
OPERATING MANUAL AND INSTRUCTIONS FOR LED SPOTLIGHT 26W MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the users.

PURPOSE OF USE

The lamp can be used for the following purpose:
• lighting workplaces.
The lamp must not be used for the following operations:
• must not come into contact with chemical and corrosive substances
• must not be immersed or submerged
• must not be used for any applications other than recommended ones

WORK AREA SAFETY

Do not operate the lamp in environments containing potentially explosive atmospheres, because
sparks may be generated, which can ignite the dust or fumes.
Keep children and bystanders away from the LED lamp.
Do not use the lamp near flammable material.
Protect the outlet from humid and wet environments, avoiding the risk of electric shocks.

SAFETY INSTRUCTIONS

• Before use, check that the lamp has not been damaged, and that no parts are worn.
• Do not force the electric circuit of the lamp.
• Neither cover the heat dissipater nor prevent it from cooling down through fresh air circulation.
• Keep the power supply cable away from oil, heat and sharp edges.
• Stay alert; watch what you are doing.
• Do not direct the light beam at people or animals: this may cause temporary blinding.
• Do not use the lamp if it is cracked, or if the power supply cable or the plug has any cuts; always
check that they are intact.
• Connect the power supply cable to the mains socket, making sure that the mains voltage matches
the one stated on the power supply device. (See Table TECHNICAL DATA)
• Do not subject the lamp to voltage overcharge.
• When not in use, store the spotlight out of the reach of children and any people who are unfamiliar
with these instructions.
• Do not modify the lamp. This can reduce the effectiveness of safety measures and increase operator
risk.
• The power supply cable cannot be replaced; if it gets damaged, replace the lamp.
6
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
LAMP. FAILURE TO COMPLY WITH THE SAFETY STANDARDS AND
OPERATING PROCEDURES MAY RESULT IN SERIOUS INJURY.
EN I