Technical Specifications - GYM form POWER BURN Mode D'emploi

8. Calves
9. Inner thighs
10. Outer thighs
You can work out many different combinations of
adjacent muscles. You choose the muscles you
want to work out. Here are some suggestions:
11. Lower front thigh + upper front thigh
12. Upper outer front thigh + upper outer rear
thigh
13. Arms: biceps + triceps
14. Arms: biceps + forearms
INSTRUCTIONS
Once you have placed the self-adhesive
electrodes (2 or 3) on the right areas, you can
start the workout and choose from six different
programmes and 10 intensity levels.
• ON/+ button to turn on and increase intensity
(5): Press this button to turn on the unit and
increase the stimulation intensity. Each time
you press the button, the intensity level will be
increased (1-10). There are 10 levels in total.
• OFF/- button to turn off and reduce intensity
(6): Press this button to turn off the unit and
reduce the stimulation intensity. Each time
you press the button, the intensity level will be
reduced (1-10). There are 10 levels in total. The
unit can be turned off by pressing the button to
the lowest intensity level.
• There are 10 stimulation intensity levels. Level
10 provides the most stimulation.
• You can change programmes at any time by
pressing the Mode button (7). Each time you
press it, a different programme will start at a
minimum intensity level. You can change this to
your desired intensity level using the + button
(5) and the - button (6).
• The Gymform® POWER BURN has six
programmes. Choose the one you like best.
• The maximum recommended time for use on
each part of the body is 10 minutes.
6
GYMFORM® POWER BURN PROGRAMMES
Programme Function
1 Massage
2 Slimming
3 Muscle Build
4 General Workout
5 Anti-Cellulite
6 Drainage
Gymform® Power Burn can be operated with
a remote control (not included). For greater
ease of use, we recommend purchasing one to
be able to work comfortably on hard-to-reach
areas.
We also recommend purchasing the Gymform®
Power Burn extra unit, which includes a unit and
a set of round electrodes so you can work on
more parts of your body at the same time.

TECHNICAL SPECIFICATIONS

Power supply: Two 3 V CR2032 batteries
Impulse frequency: 5 Hz ~ 70 Hz
Automatic shut-off time: 10 minutes
Modes: 6 programmes to choose from
Impulse intensity control: 10 intensity levels to
choose from
Impulse intensity upon choosing a programme:
The intensity level starts at 1 each time you
select a different programme.
Temperature: 0~+35ºC
<85% RH
700-1060 hPa
Continuously operating device.
Voltage: 2 x 3 V (6 V total)
Values measured at 4 kΩ
Maximum current of the electrodes supplied:
1.06mA (RMS)
Weight: (main unit without batteries)
Operating voltage: DC 3 V (2 x CR2032)
Safety classification based on the type of
protection against electric shock: internally
powered device with a type BF applied part.
ISO 7000-1641 User Guide