hawa 1201 Instructions De Montage page 8

Contents
1. Introduction
2. Cable duct type 1201
3. Accessories
4. Setup Instructions
5. Mounting
6. Instructions for Inspection, Maintenance and Repair
7. Technical Data
8. Warranty
9. Service
Pay particular attention to underligned, bold text or positions marked with waring signs in this manual!
1. Introduction
These instructions are constantly reviewed and updated if necessary (subject to technical changes) - see
http://www.haewa.com/dialog-contact/download-center.html.
You will find detailed information about products and accessories at
https://www.haewa.de/solutions-producs/cable ducts/products/type-1201 for de
Note:
Information included in the print media you have may not be up to date any more. In case of doubt, the information given on our website
shall apply.
Please use the separate mounting instructions 1201-0100-25-77 for "Straight cable ducts, can be cut to length" and for "End pieces".
2. Cable ducts type1201
All products included in the file are marked with
Position * Description
1 Straight cable duct
2 Straight cable duct, can be cut
to length
3 90° elbow
4 135° elbow
5 T-section
6 Bellow
7 Telescopic section
8
8
8
9
10
10
13
13
13
13
.
Illustration Scope of delivery
1 piece
1 piece, consisting of:
1x cable duct
1x flange
5x hinges
5x quick release buckle latch,es
1x sealing
1 piece
1 piece
1 piece
1 piece, consisting of:
1x bellow
2x flanges
1 piece, consisting of:
1x telescopic section
1x flexible flange
1x gasket