Lindy 70471 Manuel Utilisateur page 3

User Manual
Introduction
Thank you for purchasing the LINDY Optical Audio DAC with Dolby® Digital Decoder. This DAC
provides the ideal solution for converting an optical digital audio signal to analogue stereo audio. With
audio sampling rate support up to 48 kHz (Dolby® Digital) / 96 kHz (LPCM) and I/O data rate support up
to 24-bit, it provides high quality sound conversion. The Dolby® Digital Decoder function guarantees that
Dolby® Digital audio signals are down-mixed to analogue stereo without loss of quality. This unit is
perfect for use in digital recording systems, computer audio systems or digital mixing consoles and can
be powered from any spare USB port allowing it to be used with USB equipped HDTVs, Blu-ray players
or computers without the need for a separate power supply.
Package Contents

Optical Audio DAC with Dolby® Digital Decoder

USB Mini-B Cable, 0.75m

This manual
Features

Optical digital audio signal input and conversion into analogue audio signal L/R output

Supports uncompressed digital LPCM stereo or Dolby® Digital 5.1CH audio inputs

LPCM audio sampling rates from 32 to 96 kHz (32, 44.1, 48, 88.2 and 96 kHz)

Dolby Digital audio sampling rates of 48 kHz

Dolby Digital audio down-mixing to 2-channel audio

Supports S/PDIF bitstream 24-bit of data for the left and right channels

Compact, elegant design and easy to install
Specification

Optical DAC with Dolby Digital Decoder

Input port: TOSLink Optical

Digital Input Formats: LPCM 2CH and Dolby Digital 5.1 from Optical

Supported LPCM Input Frequencies: 32/44.1/48/88.2/96KHz

Supported Dolby Digital Input Frequencies: 48KHz

Supported Audio Data Rate: 16/24 bit

Output port: Phono Stereo L/R
 Phono Stereo L/R Output Impedance: 600 Ω

Frequency Response: ±1db

Total Harmonic Distortion <0.018%

Signal to Noise Ratio >80db

Power Consumption: 1.8W
English