Initial Operation - Pro Idee 877710 Mode D'emploi

Initial operation:

1. Please read the entire content of the instructions for use before using the cool
box for the first time.
2. Install the free "IPV_CCControl" app onto your smartphone or tablet.
3. Switch on the temperature sensor.
4. Switch on the Bluetooth connection on your smartphone or tablet. The app
will automatically connect with the temperature sensor within a few seconds
and in the display field (underneath "unknown thermometers") the individual
sensor number and the first current temperature measurement of the sensor
will appear.
5. For the storage of the temperature (storage of min/max temperatures over the
course of time) to begin, press the displayed sensor number and the box "Edit
Thermometer" will appear on your device.
"Name": .....................................................................................................
Please now enter a name of your choice in the "Name" field (e.g. cool box 25 l).
This makes particular sense if you want to connect several temperature sensors
with your smartphone or tablet.
"Serial number" .........................................................................................
In the "Serial number" box, there are many options you can enter:
a)
You are using the temperature sensor in a cool box by the manufacturer IPV,
you can now enter the 12-digit Type/Model No. of the respective cool box.
(You will find the Type/Model No. as well as the IPV manufacturer details
on the label of the cool box). The app then recognises in which specific cool
box the temperature sensor is used and can then provide you with additional
product-related information about the subject of mobile cooling as well as
about IPV products on the websites listed at the bottom edge of the display.
If you cannot find a 12-digit Type/Model No. on the IPV cool box, please use
the options described under b) and/or c).
NOTE: If there is a number in brackets in the Type/Model No., this does not
need to be taken into consideration.
b)
If you are using the temperature sensor in a cool box that is not by IPV, please
enter the following 12-digit Type/Model No. in the "Type/Model" No." field:
The app now recognises that you are using the sensor in a cool box that was
not specifically selected. The website information at the bottom edge of the
display will thus not be able to provide you with any specific information
about the cool box you have selected. You will, however, be able to access
530099999999
3