Kimex 164-5525 Manuel D'utilisation page 16

Some components of the above-mentioned products are not subject to these limitations, in accordance with the
provisions of Annex III of the RoHS Directive2 (WEEE Directive2 ) :
1. Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for
specific purposes not exceeding (per lamp) :
1.1. Short length (500 mm) : maximum 3.5 mg per lamp.
1.2. Average length (＞500 mm and 1.500 mm): maximum 5 mg per lamp.
1.3. High length (＞1,500 mm): maximum 13 mg per lamp.
2. Lead in the glass of cathode ray tubes.
3. Lead in the glass of fluorescent tubes does not exceed 0.2% by weight.
4. Lead as an alloying element in aluminium up to 0.4% by weight.
5. Copper alloy contains up to 4% lead.
6. High temperature solder (lead-based alloys contain 85% or more lead).
7. Electrical and electronic components containing lead in glass or porcelain
8. Piezoelectric devices or in a glass or ceramic matrix component
OPENING THE BOX AND ASSEMBLING
Before using your device for the first time, please check that the contents of the box are complete.
List of box contents :
• A professional monitor.
• A power supply cord, standard European "F" type plug.
• A remote control + user manual
AVERTISSEMENTS AND SECURITY PRECAUTIONS
Never attempt to disassemble this unit. If it does not work properly, please contact your dealer or KIMEX
International. This appliance has been carefully manufactured and complies with the applicable European
standards. However, please observe the following safety instructions carefully.
Page 16 de 20