Directions For Use; Operating The Air Purifier - Guardian Technologies AC4220 Utilisation Et Instructions D'entretien

DiRECTiONS FOR USE

SET UP
1. Select a firm, level and flat location for the air purifier. For proper air flow, locate the unit at
least 1 foot from any wall or furniture. Make sure none of the grills are blocked.
2. Carefully remove your air purifier and combination filter from box and bag.
*Filter must be removed
from plastic bag before use.
NOTE: Pre-Filter/Charcoal is
affixed to HEPA Filter with velcro.
Filter Package includes:
1 Pre-Filter/Charcoal
1 HEPA Filter
Filter lasts approximately
6-8 months depending on use.
3. Insert Combination Filter
a. Lift and remove the front cover from
the unit
c. Insert Combination Filter into the unit
with the HEPA portion facing down.
Consult the arrow on the filter for correct
installation direction.
E-6
Create ONE
COMbiNATiON
FiLTER
b. Remove Combination Filter from unit and
remove plastic bag before first use.
Note: Pre-Filter/Charcoal is affixed to HEPA
Filter with Velcro.
d. Reattach the front cover of the unit and
securely latch into place.
DiRECTiONS FOR USE

OPERATiNG THE AiR PURiFiER

1. Plug the power cord into a 120V AC outlet.
2. Turn unit power ON.
3. Select fan speed MODE 1 - 3
(1 = lowest speed setting; 3 = highest speed setting)
4. Select UV-C ON or OFF using UV-C Power Button (Figure 1).
UV-C bulb
Power
HEPA
Reset
Figure 1
Power Fan Speed
E-7